The Nauticam NA-Ninja V builds on the strong foundation Nauticam has built with previous Atomos monitor/recorder housings but is built around the new M28 large-bore bulkhead that supports HDMI 2.0. (SDI version also available)
The Ninja V is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The Ninja V features both an HDMI 2.0 input as well as an output and the NA-Ninja V supports both as well. With dual M28 bulkheads, a second HDMI cable can be run to another monitor. The Ninja V allows for the application of. cube format 3D LUTs to this output signal.
The NA-Ninja V supports up to the NP-F970 size battery which provides up to two hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-colour LED on the top of the housing.
Access to the touchscreen controls of the Ninja V and V+ is via a series of buttons and a selector knob beneath the screen of the housing including PLAY, REC, MON, RGB, PEAK and the Muti-Selector Lever.
NOTE: HDMI cables for this housing are sold separately.
What's In The Box:
- NA-Ninja V Housing
- Monitor Hood
- M16 Vacuum Valve (pre-installed) PN 25625
- Spare silicone rubber main o-ring PN 90137
- O-ring removal tool and lubricant
- CR2032 battery
- Dimensions: 224mm x 169mm x 113mm (W x H x D)
- Weight in Air: ~1.62kg
- Weight in Water: -0.36kg (with monitor, Atom X SSD, NP-F970 batt)
- Depth Rating: 100m
30 DAY RETURNS
If you change your mind, it doesn’t fit, or you become inflicted with buyer’s regret - that's OK!
Mike's Dive Cameras offer an extended returns policy of 30 days - so you can be rest assured if the suit, piece of diving equipment or gift doesn't suit then just send it back and we will either exchange it or offer a full refund less any postage costs. Too easy!
For step-by-step instructions click here